Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fairing of the Gilera Runner 180?

Model: Gilera Runner 180
Part:

Video tutorial

In order to replace the fairing of the Gilera Runner 180, you need to remove all the various panels that make it up: you start with the front shield which will be fixed by screws positioned immediately above the fender. Then you can proceed by detaching the rear covering of the instrument panel, in order to also remove the inner part of the front fairing.

Now you can unscrew the screws that fix the footrest covering, in order to detach it together with the covering of the underseat compartment: at this point it will be possible to position and fix the new panels properly.


Posted on 31 October 2025 by ScegliAuto


Related tutorials

How to Replace the Piston on a Gilera Runner 180
How to Replace the Piston on a Gilera Runner 180
Runner 180 To replace the piston on a Gilera Runner 180, extract the engine from its housing by unscrewing the bolts securing it to the supports. Once the engin…
How to replace the exhaust on the Gilera Runner 180?
How to replace the exhaust on the Gilera Runner 180?
Runner 180 The procedure for replacing the exhaust on the Gilera Runner 180 involves loosening the screws that secure the exhaust end can to its housing, locate…
How to Replace the Exhaust on a Gilera Runner 180?
How to Replace the Exhaust on a Gilera Runner 180?
Runner 180 The procedure for replacing the exhaust on the Gilera Runner 180 involves loosening the screws that secure it to its housing: once these screws are l…

How to Replace the Water Pump on a Gilera DNA 50

To replace the water pump on a Gilera DNA 50, you must completely disassemble the transmission cover along with the related components inside. On the left side of the cover, near the variator, you will find the water pump under its cover. By removing the screws that secure it from the inside, the old water pump can be taken out of its housing. After removal, insert the new spare part, reassemble the transmission, and all previously removed components.

Watch the video!


by ScegliAuto

More videos