Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the engine of the Gilera Runner 180?

Model: Gilera Runner 180
Part: Engine

This video is currently unavailable

The process of dismantling the engine of the Gilera Runner 180 starts by removing all the fairings around it, allowing you to unscrew all the bolts of the supports and the related pipes and connectors attached to the engine. Once the engine block has been extracted, you can proceed by removing the spark plug and unscrewing the bolts that secure the cylinder.

Then, the piston must be detached from its connecting rod by removing the retaining ring, and subsequently, you can unscrew the bolts that secure the half casings, gaining access to all the internal parts of the block.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to dismantle the engine of the Gilera Runner 180?
How to dismantle the engine of the Gilera Runner 180?
Runner 180 You can dismantle the engine of the Gilera Runner 180 by loosening the screws that secure it to its housing, located at the central lower part of the…
How to Dismantle the Engine of a Gilera Runner 180?
How to Dismantle the Engine of a Gilera Runner 180?
Runner 180 To dismantle the engine of a Gilera Runner 180, first, detach all the fairings around the bike to loosen all the screws of the supports and the relat…
How to Dismantle the Engine of the Gilera Runner 180?
How to Dismantle the Engine of the Gilera Runner 180?
Runner 180 To dismantle the engine of the Gilera Runner 180, first detach all the fairings around the bike so that you can unscrew all the screws of the support…

How to Replace the Water Pump on a Gilera DNA 50

To replace the water pump on a Gilera DNA 50, you must completely disassemble the transmission cover along with the related components inside. On the left side of the cover, near the variator, you will find the water pump under its cover. By removing the screws that secure it from the inside, the old water pump can be taken out of its housing. After removal, insert the new spare part, reassemble the transmission, and all previously removed components.

Watch the video!


by ScegliAuto

More videos