Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, we will see how to change the engine oil in a KTM 1290 Super Duke R, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath the bike, locate the bolts of the two drain holes, and unscrew them using a 13mm socket. Allow all the oil in the system to drain out, open the filter cap with a T30 Torx key, and insert the replacement. At this point, all that remains is to reassemble everything and add the necessary amount of oil through the designated top hole.

Posted on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

1290 Super Duke R In this tutorial, we can see how to replace the motor oil in the KTM 1290 Super Duke R, an extremely simple and fast operation. First of all, we wait…
1290 Super Duke R .. In this tutorial, see how to change the engine oil in a KTM 1290 Super Duke R, a very simple and quick operation to perform.. …
1290 Super Duke R You can change the engine oil on a KTM 1290 Super Duke by loosening the drain plug located at the central lower part of the vehicle: once this plug i…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos