Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Triumph Scrambler 1200 XC

Model: Triumph Scrambler 1200 Xc
Part: Engine oil

Video tutorial

To ensure the engine functions correctly over time, you must regularly change the engine oil and oil filter. Start by placing the motorcycle on a stand and unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, remove the oil filter using the appropriate tool and replace it with a new one, as shown in the video. At this point, top up with the suitable new oil, in this case, a 10W50 4-stroke.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Triumph Scrambler 1200 XC?
How to Reset the Service Light on a Triumph Scrambler 1200 XC?
Scrambler 1200 Xc To deactivate the Service light on the Triumph Scrambler 1200 XC, you need to connect a diagnostic tool to the vehicle's OBD port: this port is locat…
Dismantling the fuel tank of the Triumph Scrambler 1200
Dismantling the fuel tank of the Triumph Scrambler 1200
Scrambler 1200 Xc In this brief guide, we will see the instructions that will allow us to disassemble and replace the fuel tank of the Triumph Scrambler 1200 motorcycl…
How to Replace the Clutch on a Triumph Scrambler 1200
How to Replace the Clutch on a Triumph Scrambler 1200
Scrambler 1200 Xc You can replace the clutch on the Triumph Scrambler 1200 by loosening the screws that secure the corresponding cover located on the left side of the …

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos