Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Triumph Scrambler 1200 XC?

Model: Triumph Scrambler 1200 Xc
Part: Service warning light

Video tutorial

To deactivate the Service light on the Triumph Scrambler 1200 XC, you need to connect a diagnostic tool to the vehicle's OBD port: this port is located on the left side of the motorcycle, just under the seat. Once the scanner is connected, select the motorcycle model in question and the corresponding version: by following the instructions shown in the tutorial, you will be able to reset the Service light and also restore the maintenance interval.

Then you can disconnect the scanner, ensuring that the reset has been completed successfully.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How do you reset the Service light on the Triumph Scrambler 1200 XC?
How do you reset the Service light on the Triumph Scrambler 1200 XC?
Scrambler 1200 Xc You can completely delete the Service light that is shown on the instrument panel of the Triumph Scrambler 1200 XC by connecting a diagnostic tool to…
Dismantling the fuel tank of the Triumph Scrambler 1200
Dismantling the fuel tank of the Triumph Scrambler 1200
Scrambler 1200 Xc In this brief guide, we will see the instructions that will allow us to disassemble and replace the fuel tank of the Triumph Scrambler 1200 motorcycl…
How to Change the Engine Oil of the Triumph Scrambler 1200 XC
How to Change the Engine Oil of the Triumph Scrambler 1200 XC
Scrambler 1200 Xc To ensure the engine functions correctly over time, you must regularly change the engine oil and oil filter. Start by placing the motorcycle on a sta…

How to Replace the Rear Brake Pads on the Kymco AK 550

You can replace the rear brake pads on the Kymco AK 550 by loosening the screws that secure the brake caliper in its housing: once these screws are loosened, you can detach the caliper from the disc so that the pads inside can be extracted. The pin that holds them in place must also be removed to allow the new pads to be installed: secure the new pads in the caliper, then reinstall the caliper onto the disc, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos