Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Triumph Scrambler 1200 XC?

Model: Triumph Scrambler 1200 Xc
Part: Service warning light

Video tutorial

You can completely delete the Service light that is shown on the instrument panel of the Triumph Scrambler 1200 XC by connecting a diagnostic tool to the OBD port of the vehicle: the latter is located on the left side of the motorcycle, just below the seat.

Once the scanner is connected, you will need to select the model of the motorcycle in question and its corresponding version: following these instructions shown in the tutorial, it will be possible to delete the Service light and also restore the maintenance interval.

At this point, you can disconnect the scanner, verifying that the reset is complete.


Posted on 26 October 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Triumph Scrambler 1200 XC?
How to Reset the Service Light on a Triumph Scrambler 1200 XC?
Scrambler 1200 Xc To deactivate the Service light on the Triumph Scrambler 1200 XC, you need to connect a diagnostic tool to the vehicle's OBD port: this port is locat…
Dismantling the fuel tank of the Triumph Scrambler 1200
Dismantling the fuel tank of the Triumph Scrambler 1200
Scrambler 1200 Xc In this brief guide, we will see the instructions that will allow us to disassemble and replace the fuel tank of the Triumph Scrambler 1200 motorcycl…
How to Change the Engine Oil of the Triumph Scrambler 1200 XC
How to Change the Engine Oil of the Triumph Scrambler 1200 XC
Scrambler 1200 Xc To ensure the engine functions correctly over time, you must regularly change the engine oil and oil filter. Start by placing the motorcycle on a sta…

How to Replace the Variator of the Honda PCX 125

This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover!

Watch the video!


by ScegliAuto

More videos