Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the fuel tank of the Triumph Scrambler 1200

Model: Triumph Scrambler 1200 Xc
Part:

Video tutorial

In this brief guide, we will see the instructions that will allow us to disassemble and replace the fuel tank of the Triumph Scrambler 1200 motorcycle. First, we put the motorcycle on the stand and start by removing the rider's seat; then we unscrew the fastening screw of the tank bracket located at the bottom, and subsequently disconnect the fuel line and the electrical connector, as shown in the video.

At this point, we remove and replace the tank, possibly painting it first; we make the various connections and reassemble everything!


Posted on 29 January 2026 by ScegliAuto


Related tutorials

How do you reset the Service light on the Triumph Scrambler 1200 XC?
How do you reset the Service light on the Triumph Scrambler 1200 XC?
Scrambler 1200 Xc You can completely delete the Service light that is shown on the instrument panel of the Triumph Scrambler 1200 XC by connecting a diagnostic tool to…
How to Reset the Service Light on a Triumph Scrambler 1200 XC?
How to Reset the Service Light on a Triumph Scrambler 1200 XC?
Scrambler 1200 Xc To deactivate the Service light on the Triumph Scrambler 1200 XC, you need to connect a diagnostic tool to the vehicle's OBD port: this port is locat…
How to Change the Engine Oil of the Triumph Scrambler 1200 XC
How to Change the Engine Oil of the Triumph Scrambler 1200 XC
Scrambler 1200 Xc To ensure the engine functions correctly over time, you must regularly change the engine oil and oil filter. Start by placing the motorcycle on a sta…

How to Replace the Rear Brake Pads on the Kymco AK 550

You can replace the rear brake pads on the Kymco AK 550 by loosening the screws that secure the brake caliper in its housing: once these screws are loosened, you can detach the caliper from the disc so that the pads inside can be extracted. The pin that holds them in place must also be removed to allow the new pads to be installed: secure the new pads in the caliper, then reinstall the caliper onto the disc, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos