Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on the Sherco SM 50, unscrew the bolt located at the central rear of the seat to completely remove it from its housing. After removing the seat, proceed to detach the right side panel. Once this is removed, loosen the bolts securing the exhaust to its supports. By expanding the ring connecting it to the remaining exhaust pipe, you can insert the new replacement part, securing it with the bolts and reassembling the removed parts.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Sm 50 In order to replace the exhaust on the Sherco SM 50, you need to loosen the screws that secure the exhaust terminal to its housing. Once the screws h…
Sm 50 You can replace the exhaust of the Sherco SM-R 50 by loosening the screws that secure the cover panel located on the right side of the bike, near the…
Sm 50 The exhaust terminal of the Sherco SM 50 can be replaced by unscrewing the screw located in the central rear part of the saddle, so that the latter c…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos