Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of the Benelli TnT 125?

Model: Benelli Tnt 125
Part: Engine

Video tutorial

To dismantle the engine of the Benelli TnT 125, loosen the screws that secure the engine within its housing so that it can be completely extracted. Next, unscrew the bolts that secure the cylinder head to remove it completely from its seat.

Now, unscrew the bolts that secure the two half casings. Access the internal components and replace them if necessary.

After replacement, close the engine again by securing the casing screws and reinstalling the block in its seat.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Light on a Benelli TNT 125
How to Reset the Engine Light on a Benelli TNT 125
Tnt 125 Before you can begin, sit on the seat of your Benelli TNT 125. Start by activating the instrument panel by turning the key in the ignition switch, th…
How to Change the Engine Oil in a Benelli TNT 125?
How to Change the Engine Oil in a Benelli TNT 125?
Tnt 125 Changing the engine oil in a Benelli TNT 125 is an extremely simple and quick task. First, ensure the engine is cool enough. Then, position a contain…
How to Dismantle the Engine of a Benelli TnT 125?
How to Dismantle the Engine of a Benelli TnT 125?
Tnt 125 To dismantle the engine of the Benelli TnT 125, loosen the bolts that secure the engine block to its housing, then free the block from the intake and…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos