Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil indicator on the Suzuki Access 125

Model: Suzuki Access 125
Part: Service warning light

Video tutorial

After performing the oil change and replacing the oil filter, it is necessary to reset the oil light in order to set the kilometers until the next service. To do this operation on a Suzuki Access 125 scooter, we need to turn on the instrument panel and immediately press the SEL button on the display to access the service menu.

Press the MODE button and then hold down the SEL button until the reset is complete. Once all the steps have been completed, you can turn off and then turn on the instrument panel to complete the reset of the oil light.


Posted on 26 January 2025 by ScegliAuto


Related tutorials

How to set the time on the display of the Suzuki Access 125
How to set the time on the display of the Suzuki Access 125
Access 125 Today we will explain how to set the time on the display of the instrument panel of the Suzuki Access 125, and we will also explain how to reset the …
How to Reset the Oil Service Light on a Suzuki Access 125?
How to Reset the Oil Service Light on a Suzuki Access 125?
Access 125 To reset the Oil Service light on the Suzuki Access 125, first turn on the ignition and then press and hold the button located on the right side of t…
How to Reset the Service on the Suzuki Access 125 Scooter?
How to Reset the Service on the Suzuki Access 125 Scooter?
Access 125 In this tutorial, you will see how to reset the service on the Suzuki Access 125 scooter, a very simple and quick operation to perform only after com…

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos