Do it yourself
| ||||
|
Model: Enfield Classic 350
In this tutorial, we can see how to replace the engine oil in the Royal Enfield Classic 350, an extremely simple and fast operation. First of all, make sure that the engine is sufficiently cold, so that you can work safely. Then, place a container underneath the bike, unscrew the bolts of the two drainage holes, and let all the oil in the system drain out. Next, open the cap of the intake hole to facilitate the bleeding process, tighten the two bolts, and pour in the necessary amount of oil to reach the ideal level.
Posted on 11 January 2024 by ScegliAuto
|
How do you change the Benelli TnT 150 engine oil?The replacement of the Benelli TnT 150 engine oil is carried out by unscrewing the drain plug of the tank containing the oil, located in the lower part of the motorcycle. Once this has been unscrewed, it will be possible to go and place a container under it, so that the oil is completely collected. Then you can close the cap once everything is finished and unscrew the screws that fix the casing on the right side of the bike: under it you will find the oil filter, which must be extracted and replaced. After replacing the filter, it will be possible to top up the oil by inserting the oil in the breather located on the crankcase next to that of the filter. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |