Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Enfield
    3. :
  3. Classic 350
    4. : How to replace the engine oil in the Royal Enfield Classic 350?

Model: Enfield Classic 350
Part: Engine oil
How to replace the engine oil in the Royal Enfield Classic 350?

In this tutorial, we can see how to replace the engine oil in the Royal Enfield Classic 350, a very simple and quick operation. First of all, make sure that the engine is cold enough, then place a container under the bike, locate the drain plug and unscrew it using a socket wrench. Let all the oil in the system drain out, open the filter housing and clean it from any dirt residue. At this point, all that's left to do is reassemble everything and pour in the new oil through the top hole.


Posted on 7 April 2024 by ScegliAuto

Honda Cb 125R crown and pinion replacement

Let's find out in this guide how to remove and replace the crown and pinion of the Honda Cb 125R motorcycle, following the instructions below. First of all we put the rear stand and begin to disassemble the rear wheel, unscrewing the central pin of the wheel; then we go to disconnect and remove the chain, then unscrewing the two screws of the pinion to remove it, as shown in the video. At this point we unscrew the screws of the crown to remove it and replace it with the new one, having the right toothing; then we reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos