Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Front Brake Pads on the Honda CBR 1000RR

Model: Honda Cbr 1000rr
Part: Brake pads

Video tutorial

Today we will discover the instructions on how to remove and replace the front brake pads on the Honda CBR 1000RR. First, place the bike on a stand and begin to unscrew the bolts securing the front brake calipers, in order to remove them from the discs; apply pressure to the caliper piston to remove the old pads, as shown in the video.

At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, performing the same operation on the other brake caliper.


Posted on 16 October 2026 by ScegliAuto


Related tutorials

How do you replace the front brake pads of the Honda CBR 1000RR?
How do you replace the front brake pads of the Honda CBR 1000RR?
Cbr 1000rr In order to replace the front brake pads of the Honda CBR 1000RR, you will need to loosen the screws that hold the brake caliper corresponding to its…
Removing Front Mudguard on Honda CBR 1000RR
Removing Front Mudguard on Honda CBR 1000RR
Cbr 1000rr In today's video, you will find instructions for removing the front mudguard on a Honda CBR 1000RR. To remove the mudguard, you need to take off the …
How to Replace the Coolant on a Honda CBR 1000RR
How to Replace the Coolant on a Honda CBR 1000RR
Cbr 1000rr Today, you will learn how to bleed the cooling system and replace the radiator fluid or antifreeze on a Honda CBR 1000RR. First, unscrew the cap of t…

How to Replace the Spark Plugs on a Harley Davidson Iron 883

Today's guide shows you the steps to remove and replace the engine spark plugs on a Harley Davidson Iron 883 motorcycle. First, place the bike on a stand and disconnect the lead or connector from the spark plug (in this case, there are two cylinders and therefore two spark plugs); then use a socket spanner with an extension to unscrew and remove the spark plug, as shown in the video. At this point, hand-tighten the new spark plug, ensuring it is the correct type and has the same thread pitch, then tighten it with a spanner to the torque specified in the instruction manual!

Watch the video!


by ScegliAuto

More videos