Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the Service light of the Royal Enfield Meteor 350, you need to insert the ignition key into the slot, so that you can turn it to start the instrument panel: once the instrument panel is turned on, you can press the button located on the right side of the handlebars repeatedly until the "Trip B" message appears. Now you will need to hold it down for about ten seconds, until the Service light disappears from the instrument panel; at the end of the reset, you can turn off the instrument panel.

Posted on 18 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Indicator Bulb on the Royal Enfield Meteor 350
How to Replace the Indicator Bulb on the Royal Enfield Meteor 350
Meteor 350 To replace the indicator bulb on the Royal Enfield Meteor 350, unscrew the screw located at the back of the indicator unit. This will allow you to re…
How to Replace the Front Indicator Bulb on the Royal Enfield Meteor 350?
How to Replace the Front Indicator Bulb on the Royal Enfield Meteor 350?
Meteor 350 You can replace the front indicator bulb on the Royal Enfield Meteor 350 by loosening the screw located at the back of the corresponding side light: …
How to Replace the Fuses on Royal Enfield Meteor 350?
How to Replace the Fuses on Royal Enfield Meteor 350?
Meteor 350 To replace the fuses on the Royal Enfield Meteor 350, insert the key into the lock located beneath the panel on the left side of the bike. This will …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos