Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of a Royal Enfield Meteor 350

Model: Enfield Meteor 350
Part: Wheel

Video tutorial

Today's procedure will show you how to replace the rear wheel of the Royal Enfield Meteor 350 in a few simple steps. First, place the bike on its centre stand and begin to unscrew the central nut of the wheel using a socket wrench with an extension.

Then, unscrew the bolts securing the brake caliper, also removing the support as shown in the video. At this point, disconnect the drive chain and remove the wheel, replacing the tyre if necessary.

Refit the wheel and reconnect the drive chain, adjusting the chain as needed!


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Royal Enfield Meteor 350
How to Change the Engine Oil of the Royal Enfield Meteor 350
Meteor 350 In this guide, learn how to replace the engine oil and oil filter of the Royal Enfield Meteor 350 in simple and quick steps. First, place your motorc…
How to Adjust the Valves on the Royal Enfield Meteor 350
How to Adjust the Valves on the Royal Enfield Meteor 350
Meteor 350 This guide explains how to adjust the valve clearance on the Royal Enfield Meteor 350 motorcycle, as well as the Classic 350. First, place the motorc…
Replace Engine Oil and Oil Filter on Royal Enfield Meteor 350
Replace Engine Oil and Oil Filter on Royal Enfield Meteor 350
Meteor 350 Today, learn how to perform routine maintenance by changing the engine oil and oil filter on a Royal Enfield Meteor 350. First, position the motorcyc…

How to Replace the Engine Oil and Gear Oil of the Sym Fiddle 125

It is very simple to perform the routine maintenance service by replacing the engine oil and gear oil of the Sym Fiddle 125 scooter. First, place your scooter on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the filler screw and pour in the new oil, filling up to the maximum level mark. Now perform the same operation for the transmission oil replacement by unscrewing the drain screw located on the casing!

Watch the video!


by ScegliAuto

More videos