Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Engine Oil and Oil Filter on Royal Enfield Meteor 350

Model: Enfield Meteor 350
Part: Engine oil

Video tutorial

Today, learn how to perform routine maintenance by changing the engine oil and oil filter on a Royal Enfield Meteor 350. First, position the motorcycle on the centre stand and start by removing the oil drain bolt located under the engine, allowing it to drain for about ten minutes.

Next, remove the oil filter cover by unscrewing the three securing screws: extract and replace the filter with a new one of the correct type.

Finally, pour in the new engine oil after removing the filler cap!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Royal Enfield Meteor 350
How to Change the Engine Oil of the Royal Enfield Meteor 350
Meteor 350 In this guide, learn how to replace the engine oil and oil filter of the Royal Enfield Meteor 350 in simple and quick steps. First, place your motorc…
How to Replace the Headlamp Bulb on the Royal Enfield Meteor 350?
How to Replace the Headlamp Bulb on the Royal Enfield Meteor 350?
Meteor 350 To replace the headlamp bulb on the Royal Enfield Meteor 350, loosen the screws that secure the headlight unit within its housing: these screws are l…
How do you reset the Service indicator light on the Royal Enfield Meteor 350?
How do you reset the Service indicator light on the Royal Enfield Meteor 350?
Meteor 350 To reset the Service light of the Royal Enfield Meteor 350, you need to insert the ignition key into the slot, so that you can turn it to start the i…

Removing and Replacing the Battery of the Harley Davidson Iron 883

In this video, follow the instructions to remove and replace the battery of the Harley Davidson Iron 883. First, place your motorcycle on the stand and remove the rider's seat. Next, disconnect the electrical connector located on the side and undo the fixing screw of the battery bracket using a socket spanner with an extension, as shown in the video. At this point, disconnect the battery wiring to remove it and replace it with the new one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos