Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to remove the air filter on a Piaggio Vespa VXL 125 scooter, a very simple and quick operation, to be performed if you need to clean or replace it. First, wait until the engine is sufficiently cool, then disconnect the shock absorber from the casing by unscrewing the relevant fixing bolt. Next, open the airbox by unscrewing the additional screws indicated, remove the filter itself, and clean the inside of the housing from any dirt residue. At this point, simply insert the replacement and reassemble everything.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plug in the Piaggio Vespa VXL 125 scooter?
How to replace the spark plug in the Piaggio Vespa VXL 125 scooter?
Vespa Vxl 125 In this tutorial we can see how to replace the spark plug in the Piaggio Vespa VXL 125 scooter, an extremely simple and quick operation. First of all…
How to set the time on the Piaggio Vespa VXL 125 scooter?
How to set the time on the Piaggio Vespa VXL 125 scooter?
Vespa Vxl 125 In this tutorial we can see how to adjust the time on the Piaggio Vespa VXL 125 scooter, an extremely simple and quick operation, to be carried out f…
How to Set the Clock on the Piaggio Vespa VXL 125
How to Set the Clock on the Piaggio Vespa VXL 125
Vespa Vxl 125 In this brief guide, we will provide instructions to change the time on the display of the Piaggio Vespa VXL 125 instrument panel. First, place the s…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos