Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the motor oil of the MV Agusta Brutale 800?

Model: Mvagusta Brutale 800
Part: Engine oil

Video tutorial

The motor oil in the MV Agusta Brutale 800 system can be replaced by loosening the drain plug of the oil pan, located in the lower central part of the vehicle: once the plug has been removed, it will be possible to collect the oil inside a properly positioned container.

It will be necessary to drain all the used oil and finally it will be possible to close the tank again with the respective drain plug.

At this point it will also be possible to extract the oil filter, located in the same position; it will be necessary to replace it with a new spare part, verifying that everything is functioning properly.


Posted on 17 March 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a MV Agusta Brutale 800 RR
How to Change the Engine Oil and Oil Filter on a MV Agusta Brutale 800 RR
Brutale 800 Today, let's explore the step-by-step instructions that will allow you to perform the routine maintenance service by changing the engine oil and oil …
How to Change the Engine Oil of the MV Agusta Brutale 800?
How to Change the Engine Oil of the MV Agusta Brutale 800?
Brutale 800 To change the engine oil of the MV Agusta Brutale 800, loosen the drain plug located at the bottom centre of the vehicle's oil sump. Once the plug is…
How do you replace the engine oil of the MV Agusta Brutale 800?
How do you replace the engine oil of the MV Agusta Brutale 800?
Brutale 800 The engine oil of the MV Agusta Brutale 800 can be replaced by loosening the drain plug of the oil pan, which is located in the central lower part of…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos