Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 300
Part: Clock

The clock on the instrument panel of the Yamaha Xmax 300 can be adjusted by turning on the instrument panel, turning the key in the ignition block: once the panel is turned on, you can press and hold the button located on the right side of the handlebar, just below the red button. In this way, you can see that the hours will start flashing, and can be adjusted by pressing the button repeatedly; after a few seconds, you will notice that the minutes will also start flashing, which can be adjusted in the same way.

Posted on 18 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the Yamaha Xmax 300?
How to Set the Clock on the Yamaha Xmax 300?
Xmax 300 To adjust the clock on the Yamaha Xmax 300, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is powered, press…
How to Set the Clock on the Yamaha Xmax 300?
How to Set the Clock on the Yamaha Xmax 300?
Xmax 300 To adjust the clock on the Yamaha Xmax 300, turn on the instrument panel by inserting the appropriate key into the ignition switch. Once the instrume…
How do you set the clock on the Yamaha Xmax 300?
How do you set the clock on the Yamaha Xmax 300?
Xmax 300 The clock shown on the instrument panel of the Yamaha Xmax 300 can be adjusted by turning on the instrument panel and turning the key inside the igni…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos