Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 09
Part: Engine oil

To maintain the proper functioning of the engine and ensure longevity, perform regular maintenance checks. Here’s how to replace the engine oil and oil filter on the Yamaha MT-09. First, place the motorcycle on a stand and begin by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Next, use the appropriate tool to unscrew the oil filter, removing and replacing the cartridge with a new one. Finally, pour in the oil specified in the user and maintenance manual!

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Yamaha MT-09
How to Change the Engine Oil and Oil Filter on a Yamaha MT-09
Mt 09 These brief steps will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Yamaha MT-09 motorcycle…
How do you replace the motor oil of the Yamaha MT-09?
How do you replace the motor oil of the Yamaha MT-09?
Mt 09 To perform an oil change on the Yamaha MT-09, you need to loosen the drain plug located in the lower center of the bike, allowing all the used oil to…
How to Change the Engine Oil in a Yamaha MT-09?
How to Change the Engine Oil in a Yamaha MT-09?
Mt 09 In this tutorial, see how to change the engine oil in the Yamaha MT-09, a very simple and quick operation to perform every 12 months. First, ensure t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos