Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 09
Part: Engine oil

These brief steps will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Yamaha MT-09 motorcycle. First, place your motorcycle on the stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge and replace it with a new one, as shown in the video. At this point, unscrew the filler cap and pour in the new engine oil of the correct type, filling it up to the maximum level mark.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Yamaha MT-09?
How to replace the motor oil in the Yamaha MT-09?
Mt 09 In this tutorial we can see how to replace the engine oil in the Yamaha MT-09, a very simple and quick operation. First of all, make sure that the en…
How to Change the Engine Oil in the Yamaha MT-09?
How to Change the Engine Oil in the Yamaha MT-09?
Mt 09 In this tutorial, see how to change the engine oil in the Yamaha MT-09, a straightforward and quick operation. First, ensure the engine is sufficient…
How to Change the Engine Oil in a Yamaha MT-09?
How to Change the Engine Oil in a Yamaha MT-09?
Mt 09 In this tutorial, you will see how to change the engine oil in a Yamaha MT-09, a very simple and quick operation. First, ensure that the engine is co…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos