Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service on Yamaha MT-09

Model: Yamaha Mt 09
Part: Engine oil

Video tutorial

For this motorcycle, it is recommended to use 2.5 litres of Motul 7100 10W-40 oil (or Bardhal XTS). Start the motorcycle for a few minutes to make the oil more fluid, aiding in the subsequent draining. Unscrew the top cap of the engine oil compartment and then the bottom one to ensure air circulation during the oil flow.

Collect the used lubricant in a container and dispose of it properly. Pour the recommended oil through the top hole and tighten this cap as well.

During the draining, if it is time, change the oil filter, which simply unscrews, remembering to lubricate the O-ring of the new filter.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How do you set the clock on the Yamaha MT-09?
How do you set the clock on the Yamaha MT-09?
Mt 09 The clock on the Yamaha MT-09 can be adjusted by turning on the instrument panel, inserting the key into the ignition switch: once the instrument pan…
How to Replace the Battery on the Yamaha MT-09
How to Replace the Battery on the Yamaha MT-09
Mt 09 To replace the battery on the Yamaha MT-09, you need to completely remove the seat from its housing. Once the seat is removed, you can locate the bat…
Dismantling and Replacing the Shock Absorber of the Yamaha MT-09
Dismantling and Replacing the Shock Absorber of the Yamaha MT-09
Mt 09 Follow the instructions below to dismantle and replace the shock absorber or central suspension of the Yamaha MT-09. First, place your motorcycle on …

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos