|
Do it yourself
| |||
| ||||
How to Set the Clock on the Yamaha Xmax 300?
Model: Yamaha Xmax 300
Video tutorial
To adjust the clock on the Yamaha Xmax 300, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the button. After a few seconds, the minutes will also start to flash, and you can modify them in the same way.
Updated on 7 September 2026 by ScegliAuto
Related tutorials
Xmax 300
To adjust the clock on the Yamaha Xmax 300, turn on the instrument panel by inserting the ignition key into the ignition switch. Once the panel is po…
Xmax 300
On the instrument panel of the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel and rotating the appropriate key in the i…
Xmax 300
On the Yamaha Xmax 300, the clock can be adjusted by turning on the instrument panel, turning the key inside the ignition switch: once the panel is t…
|
Replacing the Rear Brake Pads of the BMW G310 GS
Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |