Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Yamaha X-MAX

Model: Yamaha X Max
Part: Service warning light

Video tutorial

Let’s see how to reset the service light on a Yamaha X-Max: Insert the key into the instrument panel without starting the engine. Then press the "sel" button until you select the screen that shows the "oil" message, which is where we will reset the oil light.

On the right, there is a button with two crossing arrows: that is the "reset" button, and we will press it for about three seconds. We will see the "oil" message start to flash.

Release the button and the message should disappear or stop flashing, confirming that the counter has been reset. Press the "sel" button again to return to the main screen.


Posted on 12 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service on a Yamaha X-Max 250
How to Reset the Service on a Yamaha X-Max 250
X Max In this video, we will see how to reset the service on a Yamaha X-Max 250. In this specific case, the YouTuber had the service done at a dealership b…
How to restore the service indicator on a Yamaha X-Max
How to restore the service indicator on a Yamaha X-Max
X Max .. In this video, we see how to reset the service light on a Yamaha X-Max: make sure the engine is off, and the electrical panel.. …
How to reset the oil warning light on the X Max 250
How to reset the oil warning light on the X Max 250
X Max This article explains how to reset the oil warning light on the Yamaha X Max 250. The procedure takes less than 1 minute and requires no tools or sof…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos