Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we see how to reset the service light on a Yamaha X-Max: make sure the engine is off, and the electrical panel is on. Use the right and left buttons to select the "setting" option on the display, and press the "sel" button located in the center of the handlebars to access it. Select "information" and confirm, from here use the arrows to go to "maintenance" and confirm again. A wrench will appear on the display next to the word "oil". Select this option and press "sel". The system will ask for confirmation. The service light should now disappear from the display.

Posted on 11 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Yamaha X-MAX
How to Reset the Service Light on a Yamaha X-MAX
X Max Let’s see how to reset the service light on a Yamaha X-Max: Insert the key into the instrument panel without starting the engine. Then press the "sel…
How to restore the oil in the X Max 250
How to restore the oil in the X Max 250
X Max In this article we will see how to reset the oil light on the Yamaha X Max250. The procedure takes less than 1 minute to complete and does not requir…
How to Reset the Service on a Yamaha X-Max 250
How to Reset the Service on a Yamaha X-Max 250
X Max In this video, we will see how to reset the service on a Yamaha X-Max 250. In this specific case, the YouTuber had the service done at a dealership b…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos