Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Yamaha X-Max 250

Model: Yamaha X Max
Part: Warning light – error code

Video tutorial

In this video, we will see how to reset the service on a Yamaha X-Max 250. In this specific case, the YouTuber had the service done at a dealership but forgot to reset the indicator: however, our friend did not lose heart. He consulted the user manual and informs us how to remedy this unfortunate oversight.

The first service is done at 1,000 kilometres, the second at 5,000, and then every 5,000 km. Now the instrument panel is requesting an oil service. To reset, push the trip lever until you reach the release eyelet, and hold it for 3 seconds.

The message will start to flash: keep holding until it stops flashing. At that point, it resets and the operation is complete.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Yamaha X-Max 250
How to Reset the Oil Light on the Yamaha X-Max 250
X Max .. can see how to reset the oil light on a Yamaha X-Max 250 scooter. Turn the key and it will immediately show the oil change message. The YouTuber has already.. …
How to reset the oil warning light on the X Max 250
How to reset the oil warning light on the X Max 250
X Max .. to reset the oil warning light on the Yamaha X Max 250. The procedure takes less than 1 minute and requires no tools or software. It is recommended.. …
How to restore the service indicator on a Yamaha X-Max
How to restore the service indicator on a Yamaha X-Max
X Max In this video, we see how to reset the service light on a Yamaha X-Max: make sure the engine is off, and the electrical panel is on. Use the right an…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos