Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the time on the 2013 X Max 125

Model: Yamaha X Max
Part: Clock

Video tutorial

In this article we will see how to adjust the time on the instrument panel of the 2013 Yamaha X Max 125. The procedure takes less than 1 minute to be completed and does not require any tools. To adjust the time, first start the instrument panel, then press and hold the SELECT button located at the top left of the panel for 4 seconds, after 4 seconds the time will start flashing, at this point press the SELECT button to adjust the hour, press and hold it for another 4 seconds to confirm, adjust the minutes as done for the hour and confirm again as done for the hour.


Posted on 19 May 2025 by ScegliAuto


Related tutorials

How to Set the Time on the X Max 300
How to Set the Time on the X Max 300
X Max This article explains how to adjust the time on the X Max 300. The procedure takes less than 1 minute. To perform this procedure, press the trip butt…
How to raise and lower the windshield of the Yamaha X-MAX 125
How to raise and lower the windshield of the Yamaha X-MAX 125
X Max In this video we can see how to raise or lower the front windshield of the Yamaha X-MAX 125 scooter: we notice that on the transparent part there are…
How to Set the Time on the Yamaha X-Max
How to Set the Time on the Yamaha X-Max
X Max To set the time on the Yamaha X-Max scooter, follow these steps: Ensure the scooter is on and the display is lit. Locate the "MODE" button on the das…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos