Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the X Max 300

Model: Yamaha X Max
Part: Clock

Video tutorial

This article explains how to adjust the time on the X Max 300. The procedure takes less than 1 minute. To perform this procedure, press the trip button, holding it to the left, and start the ignition.

Once the ignition is on, release the button, and the time will start to flash. Adjust the hour by moving the trip button to the left.

Once the hour is set, press the trip button to confirm and adjust the minutes. After setting the minutes, press the trip button again to complete the procedure.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Set the Time on the Yamaha X-Max
How to Set the Time on the Yamaha X-Max
X Max To set the time on the Yamaha X-Max scooter, follow these steps: Ensure the scooter is on and the display is lit. Locate the "MODE" button on the das…
How to reset the oil light on the X Max 300
How to reset the oil light on the X Max 300
X Max This video tutorial shows the procedure to reset the oil light on the Yamaha X Max. The procedure is very simple and quick. To perform this procedure…
How to change the time on the 2013 X Max 125
How to change the time on the 2013 X Max 125
X Max In this article we will see how to adjust the time on the instrument panel of the 2013 Yamaha X Max 125. The procedure takes less than 1 minute to be…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos