Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha X Max
Part: Clock

To set the time on the Yamaha X-Max scooter, follow these steps: Ensure the scooter is on and the display is lit. Locate the "MODE" button on the dashboard or handlebar. It may be labelled as "SET" or have a clock icon. Press the "MODE" button to enter the clock setting mode. Once in the clock setting mode, the display will show the current time flashing or a numerical value. Use the "UP" and "DOWN" buttons or the "MODE" button to adjust the hour. Press the "UP" button to increase the hour and the "DOWN" button to decrease it. After setting the desired time, press the "MODE" button to confirm the setting. The display should show the current time, and the clock setting will be complete.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the time on the 2013 X Max 125
How to change the time on the 2013 X Max 125
X Max In this article we will see how to adjust the time on the instrument panel of the 2013 Yamaha X Max 125. The procedure takes less than 1 minute to be…
How to replace the rearview mirror of the Yamaha X Max
How to replace the rearview mirror of the Yamaha X Max
X Max Today we will see how to replace the rearview mirror of the Yamaha X Max on our own. The cost of a new single mirror at an auto parts store is 35.00€…
How to Reset the Service Light on a Yamaha X-MAX
How to Reset the Service Light on a Yamaha X-MAX
X Max Let’s see how to reset the service light on a Yamaha X-Max: Insert the key into the instrument panel without starting the engine. Then press the "sel…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos