Do it yourself
Frequently asked questions about cars and motorcycles
  1. Questions and Answers
  2. :
  3. Ford
  4. :
  5. Transit
  6. : What should be the torque of the rear hub nut of the Transit?

What should be the torque of the rear hub nut of the Transit?
Years 2014-2023

Answer

The tightening torque is measured with a torque wrench, using this wrench you can be sure that you have tightened the nut or bolt to the prescribed torque. In the Ford Transit, the tightening torque measurements must be: 100_fbtIs.
Posted on: 22 May 2023 by ScegliAuto

Videos on similar topics (***)

How do you replace the Ford Transit handbrake cable?
Ford Transit (2006-2014 / MK 7) In order to replace the Ford Transit handbrake cable, you need to access the lower part of the vehicle, completely disassembling the right rear wheel
How do you replace the timing belt of the Ford Transit?
Ford Transit (2014-2023 / MK 8) The operation of replacing the timing belt of the Ford Transit involves lifting the vehicle so that the right front wheel is not in contact with the
Front hub bearing replacement
Ford Transit (2006-2014 / MK 7) To replace the front wheel bearing, lift the car on the bridge and remove the wheel to be repaired; then remove the brake caliper complete with its s

Rear hub bearing replacement
Subaru Outback (2009-2014 / BM, MK 4, BR) The replacement of the rear hub bearing requires the disassembly of all the elements connected to the hub; start by lifting the car and removing the
How to replace a rear wheel bearing
Honda Civic (1995-2001 / MK 6) This video shows you how to replace the rear wheel bearing of a Honda Civic. First you need to jack up the car. Using the screwdriver, unscrew the wh
How to replace rear brake discs on Renault Megane II
Renault Megane (2002-2010 / Megane 2) Let's see how to replace the rear brake discs on the Renault Megane II: first we need to open the front hood and open the brake fluid cap. We loosen
Rear wheel bearing replacement
Peugeot 406 (1995-2005 / MK 1) Lift the car in correspondence with the wheel on which to carry out the repair and apply a car stand, then disassemble the wheel, the brake caliper b
Replacement of rear jaws
Nissan Micra (1992-2002 / K11) Raise the car on suitable car stands and remove the rear wheel; with a few blows of the hammer, extract the drum from the hub and, in the same way, r