Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front brake disc of a Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Brake rotors

Today we will see how to replace the front brake disc of a Ford Transit MK7. Let's start the operation by removing the front wheel of the vehicle, then with a 36mm socket wrench we unscrew the central nut of the hub and push the axle joint outwards to detach it from the hub. Once this is done, we proceed to remove the brake caliper and the respective pads as shown in the video, now, with a T50 torx key, we unscrew the 5 screws holding the hub attached to the support and remove it, then with a 13mm key we unscrew the screws that fix the hub to the brake disc. Once this is done, we can replace the old brake disc with a new one and then reassemble everything following the reverse procedure.

Posted on 18 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front brake disc of the Ford Transit Custom.
Replacement of the front brake disc of the Ford Transit Custom.
Ford Transit (2012-2024 / Custom) In this guide, we will go through the instructions that will allow us to disassemble and replace the front brake disc and pads of the Ford Transit Cu…
Removing Front Brake Pads on a Ford Transit
Removing Front Brake Pads on a Ford Transit
Ford Transit (2006-2014 / MK 7) Are the front brake pads worn? Let's look at removing the pads from the brake caliper on the Transit. Remove the wheel (using a socket spanner or air…
Replacing Front Brake Discs on Ford Transit MK7 (2011)
Replacing Front Brake Discs on Ford Transit MK7 (2011)
Ford Transit (2006-2014 / MK 7) In today's video, you will see how to remove and replace the front brake discs on a 2011 Ford Transit MK7. First, lift the vehicle at the front and r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos