Do it yourself
Frequently asked questions about cars and motorcycles
  1. Questions and Answers
  2. :
  3. Fiat
  4. :
  5. Panda
  6. : What are the reasons why the start and stop does not work on the Panda?

What are the reasons why the start and stop does not work on the Panda?
Years 2003-2012

Answer

The main reason for not making the start and stop work on a Fiat Panda seems to be the under-sized battery that the parent company is fitted as standard. It is enough for the battery to be slightly discharged and the alternator cannot recharge the battery enough to make the system work. You could solve this by mounting a battery with a higher amperage.
Posted on: 26 May 2021 by ScegliAuto

Videos on similar topics (Control unit)

How to activate or deactivate the Start&Stop system of the Fiat Panda Cross 3
Fiat Panda (2012-2023 / 319, MK 3) In this new mini guide dedicated to all of you who own a third series Fiat Panda Cross (2012-2016), we will discover how to manually activate or deac
Guide on how to disassemble the drive shaft and gearbox
Fiat Panda (1980-2003 / MK 1, 141) The narrator explains the investigations that were carried out following the vibrations and jolts encountered while driving and confirmed, after a ca
How to replace the diesel filter on Fiat Panda
Fiat Panda (2003-2012 / MK 2, 169) How to replace the diesel filter on our Panda without running into labor costs? Let's see how to work alone and best. First of all we lift the engine

Disassembly of the injection control unit on Fiat Panda
Fiat Panda (2003-2012 / MK 2, 169) For safety reasons, remove the ignition key, apply the handbrake and disconnect the battery. Remove the air intake hose by pressing on the levers and
Where is the control unit located in the Fiat Panda?
Fiat Panda (2012-2023 / 319, MK 3) In this video we can see where the engine control unit of the Fiat Panda is located, useful for example in case we need to replace it. As shown, it i
Start and stop deactivation on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) To deactivate the start and stop you must first equip yourself with a vag cable (carry out the whole operation with the ignition on). After connectin
How to disassemble and replace the control unit of the Fiat Panda
Fiat Panda (2012-2023 / 319, MK 3) Today's guide will illustrate the main steps on how to disassemble and replace the Fiat Panda's central unit, following the instructions below. First
How to reset the ECU on Chrysler, Dodge, Jeep cars
(Various brands) Various Today we will show you a very simple but clever trick to reset the car ECU at no cost. Turn off the car, pull the handbrake and remove the ignition k