Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Acura Ilx - Key

Key Acura Ilx (2013-2022 / mk 1)

Acura Ilx (2013-2022 / MK 1)
How to Replace the Remote Battery in the Acura ILX?
As shown in this tutorial, replacing the remote battery in the Acura ILX is a very simple task. You will need a small flathead screwdriver and a replacement …Read all…
Posted on 10 September 2026 by ScegliAuto
Acura Ilx (2013-2022 / MK 1)
How to Replace the Key Fob Battery for the Acura ILX?
In this tutorial, you will see how to replace the key fob battery for the Acura ILX, a very simple task. You will only need a replacement CR2032 battery and a …Read all…
Posted on 5 September 2026 by ScegliAuto
Acura Ilx (2013-2022 / MK 1)
How to Replace the Key Battery in an Acura ILX
If your Acura ILX key has suddenly stopped working, you may be facing a completely dead battery. The solution is to replace it with a new, compatible model. …Read all…
Posted on 1 September 2026 by ScegliAuto
Acura Ilx (2013-2022 / MK 1)
How to Replace the Remote Battery for the Acura ILX?
Replacing the remote battery for the Acura ILX, as shown in this tutorial, is an extremely simple and quick task. For this, you will need a small flathead …Read all…
Posted on 1 August 2026 by ScegliAuto
Car stereo (1) Battery (1) Spark plugs (1) Body (2) Key (4) Fog lights (1) Air filter (1) Cabin air filter (3) Accessory kit (1) Headlight bulb (1) Interior dome light bulb (1) Antifreeze coolant (1) Engine oil (1) Front bumper (1) Brake pads (1) Fuse box (1) Side mirror (1) Service warning light (2) Windshield wipers (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos