Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Acura Ilx
    4. : Bodywork

Acura Ilx - Bodywork

Acura Ilx (2013-2022 / MK 1)
How to remove the front bumper of an Acura Ilx.
If we want to proceed with removing the front bumper on this car, we will find the information and procedure to follow in the description below and we can also …read all…
Posted on 1 April 2023 by ScegliAuto
Acura Ilx (2013-2022 / MK 1)
Mount Vortex generators on Acura ILx
Vortex generators are a component of the aeronautical and aerospace industry to delay flow separations. A different type of VG is also used on racing cars to …read all…
Posted on 3 August 2022 by ScegliAuto
Car stereo (1) Battery (1) Spark plugs (1) Bodywork (2) Key (4) Checks and maintenance (2) Fog lights (1) Air filter (1) Cabin air filter (2) Accessory Kit (1) Headlight bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Engine oil (1) Front bumper (1) Brake pads (1) Fuse box (1) Outside rearview mirror (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos