Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Bumper of the Acura ILX

Model: Acura Ilx MK 1 - Years 2013-2022
Part: Body

To remove the front bumper on this vehicle, follow the procedure outlined below and check the images in the video. After opening the hood, remove the bumper clips located above the grille. Then, lift the car and remove the screws securing the splash shield. Next, disconnect the clips on the sides where they meet the fenders. At this point, you can remove the bumper by pulling it toward you, making sure to disconnect the electrical connectors behind the fog lights.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Acura Ilx (2013-2022 / MK 1) To remove the front bumper from an Acura ILX, you need to unscrew all the screws and remove all the rivets located at the bottom of the bumper. Once …
Acura Ilx (2013-2022 / MK 1) In this short and simple guide, you will find instructions to remove and replace the front wipers on the Acura ILX. First, move to the front of your …
Acura Ilx (2013-2022 / MK 1) To remove the radio from an Acura ILX, use a tool to pry off the trim pieces surrounding the radio. These are located next to the steering column, be…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos