Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper from an Acura ILX

Model: Acura Ilx MK 1 - Years 2013-2022
Part: Front bumper

To remove the front bumper from an Acura ILX, you need to unscrew all the screws and remove all the rivets located at the bottom of the bumper. Once these are removed, you can unscrew those inside the front wheel wells; then, by opening the hood, you can also remove the screws at the top that secure the radiator cover. This will allow you to completely detach the bumper, so it can be replaced with a new one; the new bumper should then be secured with the appropriate screws that were previously removed.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of the Acura ILX
How to Remove the Front Bumper of the Acura ILX
Acura Ilx (2013-2022 / MK 1) To remove the front bumper on this vehicle, follow the procedure outlined below and check the images in the video. After opening the hood, remove the…
How to Remove the Radio from an Acura ILX?
How to Remove the Radio from an Acura ILX?
Acura Ilx (2013-2022 / MK 1) To remove the radio from an Acura ILX, use a tool to pry off the trim pieces surrounding the radio. These are located next to the steering column, be…
Replace the Front Wipers on the Acura ILX
Replace the Front Wipers on the Acura ILX
Acura Ilx (2013-2022 / MK 1) In this short and simple guide, you will find instructions to remove and replace the front wipers on the Acura ILX. First, move to the front of your …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos