Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Acura RDX

Model: Acura Rdx MK 1 - Years 2006-2012
Part: Front bumper

Follow these main instructions to remove and replace the front bumper of the Acura RDX. First, open the hood and start removing all the plastic clips found at the top of the bumper grille; also, unscrew the fastening screws using a 10 mm wrench, as shown in the video. At this point, unscrew the additional screws located on both sides of the wheel wells, thus releasing the bumper on the sides; remove the clips located under the bumper and finally detach it to gently remove it from the body!

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on an Acura RDX
How to Replace the Headlight Bulb on an Acura RDX
Acura Rdx (2013-2018 / MK 2) To replace the headlight bulb on the Acura RDX, open the hood to access the components inside the engine compartment. Specifically, disconnect the co…
How to Install Roof Railing on the Acura RDX
How to Install Roof Railing on the Acura RDX
Acura Rdx (2019-2026 / MK 3) In this video, you will learn how to install roof railing on the Acura RDX. Before proceeding with the installation, make sure you have purchased the…
How to Replace the Battery on the Acura RDX?
How to Replace the Battery on the Acura RDX?
Acura Rdx (2013-2018 / MK 2) To replace the battery on the Acura RDX, open the hood to access the components inside the engine bay. The battery is located near the left front hea…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos