Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Rdx
    4. : How to know the fuse diagrams of an Acura RDX

Acura Rdx - Video tutorial

Model: Acura Rdx MK 1 - Years 2006-2012
Operation: How to know the fuse diagrams of an Acura RDX

The fuse box diagram inside the cabin of an Acura RDX automobile contains fuses assigned to: fuel pump, ACG, ABS/VSA, heated seats, fog lights, driver's seat lumbar support, wipers, high beam, low beam , interior lights, tire pressure monitoring module, panoramic sunroof, door locks, power windows, accessory sockets, radio amplifier, radio, HAC, etc. The diagram relating to the fuse box located in the engine compartment instead contains fuses assigned to: ignition switch, ABS, rear window defroster, horn, engine oil level sensor, injectors, etc.


Posted on 12 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos