Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Acura
  4. :
  5. Rdx
  6. : How do I replace the headlight bulb on the Acura RDX?

Acura Rdx - Video tutorial

Model: Acura Rdx MK 2 - Years 2013-2018
Part: Headlight bulb
Operation: How do I replace the headlight bulb on the Acura RDX?

In order to replace the headlight bulb on the Acura RDX you have to go and open the hood, so that you can access the components inside the engine compartment. In particular, it will be necessary to disconnect the connector located in the internal part of the lighthouse, removing the bulb connected to it. When the old bulb has been removed, it will be possible to go and connect the new one, then inserting it inside its housing in the headlight. Once the light bulb has been installed, the hood will need to be closed, checking that the device is functional.


Posted on 25 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos