Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Rdx
    4. : How do you replace the battery in your Acura RDX?

Acura Rdx - Video tutorial

Model: Acura Rdx MK 2 - Years 2013-2018
Part: Battery
Operation: How do you replace the battery in your Acura RDX?

Replacing the Acura RDX battery is done by opening the hood and locating the device inside the engine compartment, between the air filter box and the left front headlight. When the device has been freed from its fastening bolts and power cables, it will be possible to extract it from inside its housing so that it can be replaced with a new one. After replacing the battery, it will be necessary to connect it to the cables and fix it with the appropriate bolts; then it will be possible to close the bonnet and check that everything works correctly.


Posted on 17 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos