Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on an Acura RDX

Model: Acura Rdx MK 2 - Years 2013-2018
Part: Battery

If you need to replace the battery on this vehicle model and require detailed information and advice on how to proceed, the following description outlines the steps to take. Once you open the hood, locate the battery on the right side, then disconnect the negative terminal first and then the positive terminal. Use a wrench to unscrew the support nuts of the upper plate. This way, you can remove the battery and replace it with the new one, then reconnect the negative terminal first and then the positive terminal, and finally, reattach the support nuts of the upper cross member.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in the Acura RDX?
How to Replace the Remote Battery in the Acura RDX?
Acura Rdx (2013-2018 / MK 2) As you can see in this tutorial, replacing the remote battery in the Acura RDX is a very simple and quick operation. To do this, you will need a repl…
How to Change the Key Battery of the Acura RDX 2
How to Change the Key Battery of the Acura RDX 2
Acura Rdx (2013-2018 / MK 2) To change the battery inside your second-generation Acura RDX key yourself, follow the procedure described below. First, purchase a new CR2032 button…
How to Replace the Remote Battery on an Acura RDX?
How to Replace the Remote Battery on an Acura RDX?
Acura Rdx (2006-2012 / MK 1) Replacing the remote battery on an Acura RDX, as shown in this tutorial, is an extremely simple and cost-effective task. You will need a small Philli…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos