Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on an Acura RDX 2

Model: Acura Rdx MK 2 - Years 2013-2018
Part: Key

In this guide, we will discover how to correctly replace the button battery in the key fob of your second-generation Acura RDX (2013-2018). First, take the car remote and press the small button on the cover to easily remove the physical emergency key. Once done, use the emergency key you just removed to open the remote cover and locate the dead battery inside. Finally, remove it and replace it with a new CR2032 battery. Reattach the cover, and you're finished.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in the Acura RDX?
How to Replace the Remote Battery in the Acura RDX?
Acura Rdx (2013-2018 / MK 2) As you can see in this tutorial, replacing the remote battery in the Acura RDX is a very simple and quick operation. To do this, you will need a repl…
How to Replace the Key Battery in the Acura RDX
How to Replace the Key Battery in the Acura RDX
Acura Rdx (2013-2018 / MK 2) If the smart key for your Acura RDX Mk2 (2013-2018) has suddenly stopped working and you want to replace the button battery inside, just follow these…
How to Replace the Remote Battery on an Acura RDX?
How to Replace the Remote Battery on an Acura RDX?
Acura Rdx (2006-2012 / MK 1) Replacing the remote battery on an Acura RDX, as shown in this tutorial, is an extremely simple and cost-effective task. You will need a small Philli…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos