Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Acura Rdx
    4. : Battery

Acura Rdx - Battery

Acura Rdx (2013-2018 / MK 2)
How to change the battery on the Acura Rdx.
If we need to replace the battery on this car model and we need information and advice on how to proceed in detail, in the description below we will find the …read all…
Posted on 4 April 2023 by ScegliAuto
Acura Rdx (2013-2018 / MK 2)
How do you replace the battery in your Acura RDX?
Replacing the Acura RDX battery is done by opening the hood and locating the device inside the engine compartment, between the air filter box and the left …read all…
Posted on 17 November 2022 by ScegliAuto
Acura Rdx (2013-2018 / MK 2)
How do I replace the Acura RDX battery?
In order to replace the Acura RDX battery, you need to open the hood so that you have access to the components inside the engine compartment. The battery will …read all…
Posted on 13 May 2024 by ScegliAuto
Roof Rack Bars (1) Battery (3) Spark plugs (1) Key (8) -board computer (1) Checks and maintenance (3) Air filter (4) Cabin air filter (1) Oil filter (1) Accessory Kit (1) Light bulb (1) Headlight bulb (1) License plate light (1) Door panel (2) Front bumper (1) Brake pads (1) Instrument cluster (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos