Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Acura Rdx
    4. : Air filter

Acura Rdx - Air filter

Acura Rdx (2013-2018 / MK 2)
How to replace the air filter on the Acura RDX V6 3.5L.
In this short and simple guide, we will see how to disassemble and replace the engine air filter of the Acura RDX V6 3.5L. First, we open the hood of our car …read all…
Posted on 13 April 2023 by ScegliAuto
Acura Rdx (2013-2018 / MK 2)
How to replace the air filter on your Acura Rdx
If we intend to replace the air filter on this car in do-it-yourself mode, we find the simple indications given in this description and we can also help …read all…
Posted on 26 April 2023 by ScegliAuto
Acura Rdx (2013-2018 / MK 2)
How to replace the air filter on the Acura Rdx
If we want to proceed with the replacement of the air filter on this car model, the images of the video tutorial and the description that is reported below …read all…
Posted on 26 June 2022 by ScegliAuto
Acura Rdx (2019-2024 / MK 3)
How do I replace the Acura RDX air filter?
In order to replace the Acura RDX air filter box, you need to open the hood so that you can detach the panel at the front of the engine compartment. Under this …read all…
Posted on 26 April 2024 by ScegliAuto
Roof Rack Bars (1) Battery (3) Spark plugs (1) Key (8) -board computer (1) Checks and maintenance (3) Air filter (4) Cabin air filter (1) Oil filter (1) Accessory Kit (1) Light bulb (1) Headlight bulb (1) License plate light (1) Door panel (2) Front bumper (1) Brake pads (1) Instrument cluster (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos