Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Lock Cylinder of the Toyota Highlander

Model: Toyota Highlander - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door lock

See other generations:
Video tutorial

In this short guide, find the instructions that will allow you to remove and replace the lock cylinder of the front door of the Toyota Highlander. First, open the front door of the vehicle and start removing the door panel; to do this, unscrew all the fixing screws, as shown in the video.

At this point, unscrew the internal screws of the lock cylinder, removing it from the outside; replace it with the new one, consequently replacing the key, applying the reverse procedure for reassembly!


Posted on 4 November 2026 by ScegliAuto


Related tutorials

Toyota Highlander (2001-2007 / Xu20) In this brief and simple guide, you will learn how to remove and replace the external door handle on a Toyota Highlander. First, open the front door …
Toyota Highlander (2001-2007 / Xu20) Today, follow this guide to remove and replace the external door handle on the Toyota Highlander in simple, quick steps. First, open the door and beg…
Toyota Highlander (2014-2019 / Xu50) In the Toyota Highlander, it may happen that the fuel door gets stuck, for example due to a malfunction in the control button or the lock actuator. F…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos