Do it yourself
Frequently asked questions about cars and motorcycles

How to Clean Vehicle Injectors

Model: (Various brands) Various
Part: Fuel injectors

Video tutorial

Cleaning the injectors independently is possible using spray and an air compressor. After removing the injectors, insert the air compressor into the small tube and press the button to remove air and dirt.

When the air inside the tube is free of dirt, you can then insert the injectors back into their housing. If dirt continues to escape, you can use hot water to draw through the injectors for cleaning.

Injector cleaning should be performed after approximately 20,000 miles or when the engine struggles during acceleration.


Posted on 7 November 2026 by ScegliAuto


Related tutorials

(Various brands) Various Here’s how to clean car injectors. Lift the bonnet and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors.…
(Various brands) Various In this video, we learn something very useful: how to clean our fuel injectors. You will need a solvent, such as white spirit, an air compressor or a…
(Various brands) Various Removing diesel engine injectors is not always advisable. It is a delicate job. However, if it is absolutely necessary, here is a simple method to do…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos