Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Rdx
    4. : How to remove the front door panel of the Acura RDX Mk3.

Acura Rdx - Video tutorial

Model: Acura Rdx MK 3 - Years 2019-2024
Part: Door panel
Operation: How to remove the front door panel of the Acura RDX Mk3.

The guide shows how to disassemble the front door panel of the Acura RDX Mk3. The first step is to remove the two crosshead screws located under the finishing cover in the lock handle compartment. Remove the third crosshead screw located on the lower edge of the armrest and, by levering from the edge of the panel, remove the panel from its mounting location. At this point, remove the lock cable baseplate by releasing the three fastening clips and the two electrical connectors. Remove the door finishing panel.


Posted on 8 July 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos