Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Handle on the Volkswagen Golf VI

Model: Volkswagen Golf - Years: 2008, 2009, 2010, 2011, 2012
Part: Handle

See other generations:
Video tutorial

Replacing the door handle on a Volkswagen Golf VI is a relatively simple procedure that can be done independently. Start by opening the boot by pulling the release lever from inside the vehicle, then unscrew the two locking screws of the tailgate cover using a Torx T20 key. Keep the locking screws in a bag, detach the tailgate cover by gently pulling to avoid damaging the plastic clips.

Disconnect the connector and using a T25 key, unscrew the three screws securing the handle. Insert the new handle and screw in the three screws using the T25 key. Reconnect the connector and reattach the tailgate cover.


Posted on 2 November 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Tailgate Handle on the Volkswagen Golf - Jetta
How to Remove the Rear Tailgate Handle on the Volkswagen Golf - Jetta
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Next, you will see the steps that will allow you to remove and replace the tailgate opening handle on the Volkswagen Golf, as well as the Jetta. Firs…
How to Remove the Boot Lock of the Volkswagen Golf
How to Remove the Boot Lock of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today’s steps will show you how to remove and replace the rear boot lock of the Volkswagen Golf. First, move to the rear of the vehicle and start by …
How to Open a Jammed Boot Lid on a Volkswagen Golf
How to Open a Jammed Boot Lid on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Below are the steps that will allow you to open the jammed rear boot lid of a Volkswagen Golf in an emergency. When the boot lid handle is stuck, you…

Other guides you may be interested in

How to reset the service light on the Kawasaki Versys 1000

Resetting the service light on the Kawasaki Versys 1000 is a straightforward operation that can be done independently, aided by our brief video tutorial. Start the reset procedure by turning on the instrument cluster, then simultaneously press the right and left buttons on the left lever. Once in the menu, select the service option and wait for the reset to load; once completed, press the two buttons again to return to the main menu and restart the instrument cluster to complete the reset of the service light.

Watch the video!


by ScegliAuto

More videos