Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the trunk lock of the Volkswagen Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Trunk lock

Today's steps will show us the process of disassembly and replacement of the rear tailgate lock of the Volkswagen Golf. First of all, let's move to the back of the car and start by opening the rear tailgate; then we remove the inner plastic panel and proceed to release the tailgate lock pin, then unscrew the handle fixing screw to remove it along with the lock, as shown in the video. At this point, we replace and install the new tailgate lock, following the reverse process!

Posted on 15 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Coolant Level Sensor from a Volkswagen Golf
How to Remove the Coolant Level Sensor from a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Before starting, open the bonnet of your Volkswagen Golf. Begin by disconnecting the relevant electrical connector. Next, using pliers, unclip and re…
How to Remove the Steering Wheel Airbag from a Volkswagen Golf
How to Remove the Steering Wheel Airbag from a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Before you can start, sit in the driver's seat of your Volkswagen Golf. Begin by releasing the clips that secure the airbag, located on the back of t…
How to Remove the Tailgate Lock from a Volkswagen Golf
How to Remove the Tailgate Lock from a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) How to remove the tailgate lock from a Volkswagen Golf? Follow these steps: open and lift the tailgate of your car, use a screwdriver to unscrew the …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos