Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Tlx
    4. : How do you remove the front bumper of your Acura TLX?

Acura Tlx - Video tutorial

Model: Acura Tlx MK 5 - Years 2015-2020
Part: Front bumper
Operation: How do you remove the front bumper of your Acura TLX?

To be able to remove the front bumper of the Acura TLX you have to unscrew its fixing screws: these will be found in the upper part of the piece, which will be accessible by opening the bonnet. Once these screws have been unscrewed, it will also be possible to unscrew the ones located in the seat of the front wheel arches and in the lower part of the bumper itself. Once the bumper has been completely released, it will be possible to detach it from the front of the car, replacing it with a new spare part. The latter must be suitably fixed with the screws removed previously.


Posted on 31 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos